Fri Aug 16 10:12:48 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* m68k/Makefile.in: Add -nostdlib to the test targets.
	* m68k/{idp,bcc,mvme135,mvme162}.ld: Move the CTORS and DTORS from
	.data to .text where they really belong.
	* m68k/crt0.S(launch): Don't put __do_global_dtors into atexit,
	GCC is supposed to do this in __main.

Mon Aug  5 15:04:34 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc/libsys/isatty.c: New file.

Sun Aug  4 22:32:14 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* pa/Makefile.in: Build the test case as seperate targets.
	* pa/{w89k,op50n}.ld: Use GROUP rather than INPUT to get all the
	libraries.

Fri Aug  2 18:25:07 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k/Makefile.in: Install common crt0.o, remove old references
 	to per-bsp crt0's.

Tue Jul 30 21:48:05 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* sparc/Makefile.in: Built crt0.S, not crto.s.
	* sparc/crt0.S: Don't use REGS macro, use % always.
	* sparc/salib.c: Add a prototype for putDebugChar.

Tue Jul 23 15:12:42 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc/{sysc-701.c,crt0-701.S}: New files.
	* sparc/Makefile.in (all): Build them.
	($(701_BSP),crt0-701.o): New targets.
	($(CRT0),$(SIM_CRT0),dtor.o): Don't use $<, for sunos make.
	(all): Depend on $($(CPU)_ALL).
	(install): Use $(INSTALL_DATA), not $(INSTALL_PROGRAM).
	Depend on $($(CPU)_INSTALL).
	* sparc/configure.in (libgloss_topdir): Delete unnecessary $(srcdir).
	(AC_CONFIG_AUX_DIR): Call.
	(CPU): Define.
	* sparc/configure: Regenerated.

Mon Jul 22 14:32:39 1996  Doug Evans  <dje@canuck.cygnus.com>

	* config/{default.mt,mips.mt}: Don't use $<, for sunos make.

Mon Jul 22 15:54:02 1996  Ian Lance Taylor  <ian@cygnus.com>

	* m68k/crt0.S (zerobss): Don't use dbra if __mcf5200__.

Sun Jul 14 16:47:14 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* lseek.c (lseek): Don't use SET_ERRNO.
	* open.c (open): Ditto.

Wed Jul  3 18:19:10 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* sparc/Makefile.in:  Install ex930/931/934.ld files.
	* sparc/configure, sparc/configure.in:  Use AC_CANONICAL_SYSTEM to
	define target_alias to make install work from this directory.

Wed Jul  3 18:04:49 1996  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in: Make sure we always have an argument to for.  Make
	sure rootpre and srcrootpre are always set before using
	FLAGS_TO_PASS.

Tue Jul  2 18:04:31 1996  J.T. Conklin  <jtc@hippo.cygnus.com>

	* glue.h (SET_ERRNO): Removed.
	* sbrk.c, stat.c, unlink.c: Don't use SET_ERRNO.

Mon Jul  1 14:24:51 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/Makefile.in: Add $(srcdir)/.. dependencies for all files
	in the toplevel.

Sat Jun 29 23:26:39 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* mips/cma101.c (DOSYNC): Explicitly select -mips2 for the
 	assembly of the "sync" instruction.
	* mips/Makefile.in: Removed special cma101.o build. Seperate
 	install.sh invocations for the BSP libraries.
	
Sat Jun 29 08:17:52 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* doc/porting.texi (GNU remote protocol): Fix bad texinfo.

Fri Jun 28 23:16:37 1996  Rob Savoye  <rob@chinadoll>

	* sparc/traps.S: Don't use REGS macro, use % always.
	* sparc/Makefile.in: Add -nostdlib when building the test cases,
	as gcc keeps thinks it wants two crt0.o.
	* sparc/asm.h: Don't define the REGS macro, we'll use explicit
	register prefixes. Always define USER_LABEL_PREFIX cause gcc is
	broken, and I doubt it'll get fixed.

Sat Jun 29 05:05:15 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* mips/crt0.S (zerobss): Fix the stack-pointer calculation.

Thu Jun 27 17:23:33 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips/Makefile.in (vr4300.o): Pass -mips3 after $(ASFLAGS).
	(cma101.o): Pass -mips2 after $(CFLAGS).

Tue Jun 25 22:48:15 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

	* Makefile.in (bindir, libdir): Use autoconf-set values.
	* configure: Rebuilt.

	* doc/Makefile.in (mandir, infodir): Use autoconf-set values.
	* doc/configure.in (AC_PREREQ): autoconf 2.5 or higher.
	* doc/configure: Rebuilt.

	* {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/Makefile.in 
	(bindir, libdir): Use autoconf-set values.
	* {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/configure.in
	(AC_PREREQ): autoconf 2.5 or higher.
	* {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/configure:
	Rebuilt.

Mon Jun 24 22:01:11 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* sparc/crt0.S: Set the stack to the upper part of memory. Execute
	hardware_init_hook and software_init_hook if they exist with a
	legit address. Drop into exit after main. Zero the bss section.
	* sparc/ex930.ld:  PROVIDE hardware_init_hook and
	software_init_hook.

Mon Jun 24 19:44:45 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips/Makefile.in (cma101.o): Use -mips2 option when compiling.

Wed Jun 19 13:57:36 1996  Rob Savoye  <rob@darkstar.cygnus.com>
	
	* debug.[ch]: New files for GDB stub support.
	* config/default.mt: Add rules for debug.o.
	* config/default.mh: Add rule for building C++ source. Add $srcdir
	to INCLUDES so shared header files can be found. 

	* sparc/salib.c(exceptionHandler): Range check the vector number
	so we get a legit %tbr value. Add wrappers so inbyte and outbyte
	work.
	* sparc/crt0.s: Handle cpus that don't have FP support.
	* sparc/Makefile.in: Add multilib support. Add variable for
	objcopy and objdump. Build the BSPs as archive libraries, not
	object files. Add support for the SIS sparc simulator. Build the
	test case srecords and dissasembly as seperate makefile
	targets. Also optionally build the C++ test case. Use a target
	makefile fragment.
	* sparc/configure.in: Add multilib support.
	* sparc/configure: Regenerated.
	* sparc/asm.h: Macros to deal with aout and coff formats portably.
	* sparc/slite.h: Sparclite specific stuff.
	* sparc/{sim-crt0.S,sim-stub.c,sim-io.c,sim.ld}: New support for
	the SIS sparc simulator.
	* sparc/traps.S: Generic trap handlers for SIS and ex93x targets.
	* sparc/tests.c: Test case for linking and GDB protocol.

Tue Jun 18 20:06:16 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* pa/Makefile.in: Build the test case srecords and dissasembly
	as seperate makefile targets. Also optionally build the C++ test
	case.
	* pa/crt0.S: If __stack and __globals have a legit address, use
	that for %sp and %gp. Execute hardware_init_hook and
	software_init_hook if they exist with a legit address. Add
	__do_global_dtors() to the atexit array.
	* pa/{w89k,op50n}.ld: Use GROUP rather than INPUT to get the
	libraries. Allocate the stack and global spaces from the top of
	memory. PROVIDE hardware_init_hook and software_init_hook.

	* m68k/Makefile.in: Build the test case srecords and dissasembly
	as seperate makefile targets. Also optionally build the C++ test
	case.
	* m68k/asm.h: Don't define __USER_LABEL_PREFIX__ and
	__REGISTER_PREFIX__ ourselves since suprisingly gcc sets them
	correctly for a change.
	* m68k/{bcc,mvme135,mvme162,idp}.ld: Use the same crt0 rather than
	building seperate ones. PROVIDE hardware_init_hook and
	software_init_hook. Stick the Constructors and Destructors in
	.data cause they don't work in .text (which is where they should
	really be).
	* m68k/cpu32bug: Add a few more traps to support the older ABug
	monitor.
	* m68k/crt0.S: If __stack is isn't set, set the stack to the top
	of memory. Excecute hardware_init_hook and software_init_hook if
	they exist with a legit address. Add __do_global_dtors() to the
	atexit array.

	* rs6000/Makefile.in: Use the linker script to build the test
	case. Also build a C++ test case.
	* rs6000/dtor.C: Test contructors and destructors.
	* rs6000/{sim,mvme}.ld: New linkers scripts for the simulator and
	the mvme board.
	* rs6000/evm.ld: Provide hardware_init_hook and software_init_hook
	so we can test for them in the crt0.S.
	* rs6000/crto.S: Excecute hardware_init_hook and
	software_init_hook if they exist with a legit address.

Mon Jun 17 18:39:17 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* mips/Makefile.in: Replace the "test" target with seperate
	targets for the dissasembled file, and the srecord.
	* mips/configure.in: Use a target makefile fragment.
	* mips/configure: Regenerate.
	* mips/idt.ld: Add a comment on producing srecords. Setup a space
	for the stack. PROVIDE hardware_init_hook and software_init_hook. 
	* mips/crt0.S: Make a small stack. Run memsize() using the temp
	stack, and then set the stack to the top of memory. Also grab some
	space for the globals. Add __do_global_dtors() to the atexit
	array. Call _exit from newlib so the atexit array gets run, then
	exits. 

Thu Jun 13 15:44:46 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips/Makefile.in (vr4300.o): Use -mips3 option when assembling.

Sat Jun  1 16:27:53 1996  Michael Meissner  <meissner@wogglebug.tiac.net>

	* rs6000/simulator.S (open, close, lseek): Add system calls.
	* rs6000/Makefile.in (OBJS): Don't put open.o, close.o, lseek.o
	here.
	(SIM_OBJS): Put them here instead.

Tue Apr 30 20:01:08 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* m68k/crt0.S: Don't allocate __stack in the .bss section.
	* m68k/{idp,mvme135,mvme162,bcc}.ld: Set __stack to a word below
	the top of memory. Use "-l" in GROUP rather than the full name so
	it'll get found using the path lookup in LD. Also link in libgcc
	too. Don't set __lstack anymore.
	* m68k/Makefile.in: Build test as a series of Makefile targets,
	rather than as a big loop.

Thu Apr 25 08:38:15 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/mvme-stack.S: New file, define __stack.
	* rs6000/mvme-crt0.S (_start): If __stack is not 0, use that for
	the stack address.

Thu Apr 25 06:42:02 1996  Rob Savoye <rob@chinadoll.cygnus.com>

	* rs6000/Makefile.in: Add support for multilib.
	* rs6000/configure.in: Ditto.
	* rs6000/configure: Regenerate.

Wed Apr 24 11:02:33 1996  Doug Evans  <dje@blues.cygnus.com>

	* sparc/libsys/Makefile.in (isatty.o): Add rule for SunOS VPATH.

Fri Apr 19 13:23:31 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* {mips,a29k,pa}/configure.in: Add support for multilibs
	by using config-ml.in.
	* {mips,a29k,pa}/configure: Regenerate.
	* {mips,a29k,pa}/Makefile.in: Build archive libraries,
	not objects for the BSPs.

Fri Apr 19 12:33:25 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/sol-crt0.c: Delete, file moved into gcc directory.

Mon Apr 15 14:09:26 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/simulator.S: Call _cerror to save errno if an error
	occurred.
	* rs6000/sim-errno.c (_cerrno): New function to set errno.

Thu Apr 11 14:19:01 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/sol-{crt0.c,syscall.S,cfuncs.c}: New files to support
	libgloss on PowerPC Solaris.

	* rs6000/Makefile.in: Add Solaris support.

Tue Apr 16 17:43:06 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* Makefile.in: Don't do anything if SUBDIRS is empty.

Mon Apr 15 15:37:52 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* configure.in, m68k/configure.in: Add support for multilibs by
	using config-ml.in.
	* m68k/crt0.S: If a value for __stack hasn't been specified,
	initialize %sp to some memory in .bss.
	* m68k/Makefile.in: Build archive libraries, not objects for the
	BSPs. Build multiple copies of the crt0.o, one for each target. Add
	support to build multilibs.
	* idp.ld, bcc.ld, mvme135.ld, mvme162.ld: Use GROUP to look for
	libc.a and the BSP rather than INPUT an object. Get the right
	crt0.o.

Tue Apr  9 23:31:53 1996  Ian Lance Taylor  <ian@cygnus.com>

	* m68k/cpu32bug.S (getDebugChar): Use extw/extl rather than
	extbl, so it can be used on a 68000.

Wed Mar 27 17:18:01 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/{mvme-exit,simulator}.S (_exit): Loop on a trap
	instruction following the _exit system call.  This also makes sure
	that the debugger reports the address as being in _exit, rather
	than whatever function follows _exit.

Fri Mar 15 12:30:02 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* i960/{Makefile.in,asm.h,configure,configure.in,mon-read.c,
	mon-syscalls.S,mon-write.c}: Initial support for MON960.
	* configure.in: Add support for i960.
	* configure: Rebuild with autoconf 2.8.

Fri Mar  8 18:12:52 1996  Ian Lance Taylor  <ian@cygnus.com>

	* a29k/configure.in: Call AC_CONFIG_AUX_DIR.
	* a29k/configure: Rebuild with autoconf 2.7.
	* m68k/configure.in: Call AC_CONFIG_AUX_DIR before
	AC_CANONICAL_SYSTEM.
	* mips/configure.in, pa/configure.in: Likewise.
	* rs6000/configure.in: Likewise.
	* m68k/configure, mips/configure, pa/configure: Rebuild.
	* rs6000/configure: Rebuild.

Fri Mar  8 08:11:14 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc/libsys/sbrk.S (curbrk): Moved from here,
	* sparc/libsys/cerror.S (curbrk): To here.

Thu Mar  7 11:39:09 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* mips/crt0.S (bssloop): Updated comment to reflect the source.

Wed Mar  6 18:12:25 1996  Doug Evans  <dje@charmed.cygnus.com>

	* configure.in (sparclet-*-aout*): Add entry.
	* configure: Regenerated.
	* sparc/libsys/{Makefile.in,configure.in,configure,isatty.c,
	libsys-crt0.S,sbrk.S,syscall.h,syscallasm.h,template.S,template_r.S}:
	New files.

Fri Feb 23 22:21:07 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* a29k: New dir for a29k-coff support for the AMSAT Phase-3D
	satellite. (doesn't use udi)
	* a29k/{29200-io.c,Makefile.in,configure,configure.in,README,crt0.s,
	p3dgps.ld,sa29200.ld,sa29200b.ld,test.c: New files for a29k
	support.
	* a29k/sys/{cpudef.h,intrinsi.h,macros.h,romdcl.h,sysmac.h,
	fpsymbol.h,libconfig.h,proreg.h,smartmac.h}: New files for a29k
	support.
	* configure.in: Add support for a29k.
	* configure: Rebuild.

Thu Feb 22 13:32:28 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/mvme-read.c (read): New file, if large read, do a .INLN
	system call, instead of sucessive .INCHR system calls.  Map \r on
	input to \n.

	* rs6000/mvme-inbyte.S: Add stub for new input system calls.

	* rs6000/Makefile.in (MVME_OBJS): Add mvme-read.o, delete read.o

Wed Feb 21 16:45:19 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/mvme-print.c: New file, map write into sequences of
	.OUTLN/.OUTCHR/.PCRLF rather than just using .OUTCHR.

	* rs6000/mvme-outbyte.S: Add stubs for new output system calls.

	* rs6000/Makefile.in (MVME_OBJS): Add mvme-print.o, delete print.o
	and write.o.

Thu Feb 15 11:37:02 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* mips/{mipsidt,mipspmon}.ld: Added OUTPUT_ARCH definition.
	* mips/cma101.c (time): Added time() function.

Tue Feb 13 10:36:07 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* mips/vr4300.S (__cpu_flush): Fix loop counter.

Tue Jan 30 15:41:19 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* mips/syscalls.c: Used include file, rather than local manifest
 	definitions.
	* mips/crt0.S: Removed IDT monitor entry points.
	* mips/Makefile.in: Construct mipsidt and mipspmon BSP files.
	* mips/{cma101.c,idtmon.S,pmon.S,regs.S,vr4300.S}: Added.
	* mips/{mipspmon.ld}: Added.

Sun Jan 28 08:01:31 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/configure.in (AC_INIT): Use sim-crt0.S, not crt0.s.
	* rs6000/configure: Regenerate.

Wed Jan 24 14:26:01 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/{mvme,sim}-crt0.S (__atexit): Put the __atexit variable
	in the .sdata section, and provide a fixup for the address, in
	order to support the new -msdata compiler flag.

Thu Jan 11 11:24:25 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/{mvme,sim}-crt0.S (__atexit): Provide address of atexit,
	so eabi-ctors in libgcc.a can know to register the function to
	call all of the destructors.

Sat Dec 30 14:31:37 1995  Doug Evans  <dje@canuck.cygnus.com>

	* configure.in (AC_CONFIG_AUX_DIR): Adjust to new build tree layout.
	* {doc,hp74x,m68k,mips,pa,rs6000,sparc}/configure.in
	(AC_CONFIG_AUX_DIR): Define
	* {,doc,hp74x,m68k,mips,pa,rs6000,sparc}/configure: Regenerated.

Mon Dec 11 12:20:24 1995  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (FLAGS_TO_PASS): Add INSTALL, INSTALL_PROGRAM,
	and INSTALL_DATA.

Fri Dec  1 16:54:15 1995  James G. Smith  <jsmith@cygnus.co.uk>

	* mips/syscalls.c (sbrk): Fixed memory addressing. System call
 	returns size, not (last address + 1).

Thu Nov 16 13:47:57 1995  Ian Lance Taylor  <ian@cygnus.com>

	* config/default.mh: Don't define CC_FOR_TARGET, AS_FOR_TARGET,
	AR_FOR_TARGET, LD_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET,
	OBJDUMP_FOR_TARGET, or OBJCOPY_FOR_TARGET.  Change the build rules
	to use CC, etc., instead of CC_FOR_TARGET, etc.
	* configure.in, */configure.in: Get values for CC, AS, AR, LD, and
	RANLIB.  Always use default.mh.
	* Makefile.in (FLAGS_TO_PASS): Pass down LD.
	* Makefile.in, */Makefile.in: Let CC, AS, AR, LD, and RANLIB by
	substituted by the autoconf configure script.  Use them instead of
	the *_FOR_TARGET variants.
	* hp74x/configure.in: Don't call AC_CANONICAL_SYSTEM.
	* m68k/configure.in: Call AC_ARG_PROGRAM.
	* mips/configure.in, pa/configure.in: Likewise.
	* rs6000/configure.in: Likewise.
	* m68k/Makefile.in: Set program_transform_name, OBJDUMP, and
	OBJCOPY.
	* mips/Makefile.in, pa/Makefile.in, rs6000/Makefile.in: Likewise.
	* mips/Makefile.in: Split new test target from all target.
	* configure, */configure: Rebuild.

Tue Nov 14 12:04:36 1995  Angela Marie Thomas (angela@cygnus.com)

	* Makefile.in: Added prefix, exec-prefix and tooldir to
	FLAGS_TO_PASS so vaulting works correctly.

Tue Nov 14 18:32:41 1995  James G. Smith  <jsmith@cygnus.co.uk>

	* mips/mipsidt.ld: Added.
	* mips/syscalls.c: Added.
	* mips/crt0.S: Added FPU presence check, and entry points into IDT
	monitor.
	* mips/Makefile.in (all): Updated to build generic IDT monitor
 	crt0.o file.
	* mips/.Sanitize (Things-to-keep): Added mipsidt.ld and syscalls.c
 	to list.
	* mips/test.c (main): Removed unnecessary prototypes.
	* configure.in (configdirs): Removed mips64vr4300 target.
	* configure: Re-generated.
	* config/default.mh (OBJDUMP_FOR_TARGET): Added missing parent
 	directory path element.
	* mipsidt: Directory removed.

Fri Nov 10 12:50:03 1995  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in, */configure.in: Don't call AC_ARG_PROGRAM.
	* configure, */configure: Rebuild.
	* Makefile.in, */Makefile.in: Don't set program_transform_name.

Wed Nov  8 16:19:31 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>

	* configure.in (configdirs): Add mips*vr4300*-*-* target.

	* configure: Re-generated.
	
	* mipsidt/crt0.S: Check for FPU presence.

	* mipsidt/mipsidt.ld: Removed explicit crt0.o from link.

	* mipsidt/Makefile.in: Explicitly link against crt0.o file.

Thu Nov  2 23:27:28 1995  Rob Savoye  <rob@chinadoll.cygnus.com>

	* config/default.mh: Add additional "../" to path used to find
	comp-tools binaries in an object tree.

Mon Oct 30 18:10:47 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/mvme-crt0.S (_start): Zero out bss before the the program
	starts.

Tue Oct 24 10:07:50 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/mvme-{exit,outbyte,inbyte}.S: Use hex for the system
	calls, not decimal, since formatting the disk when you intend to
	write out a character is not nice.

Mon Oct 23 22:17:12 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/mvme-crt0.S (_start): Bump sp by -4 before storing end of
	stack chain to avoid last word indebugger's memory.

	* rs6000/mvme-{exit,inbyte,outbyte}.S: System call number goes in
	r10, not r0.

Mon Oct 23 17:57:23 1995  James G. Smith  <jsmith@jaalfrezi.cygnus.co.uk>

	* mipsidt/Makefile.in: Removed the LDFLAGS_FOR_TARGET in the test
 	program link.

	* mipsidt/crt0.S: Changed monitor entry sequence.

	* mipsidt/syscalls.c: Added local sbrk() function, derived from
 	(libgloss/sbrk.c), but using the monitor routine to ascertain the
 	amount of memory available.
	
Mon Oct 23 11:58:04 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>

	* mipsidt: Added (directory). This is a simple crt0 module for the
 	IDT MIPS monitor. The existing "libgloss/mips" directory is for a
 	specific R3000 board, so it was safer creating a new target
 	directory.
	* mipsidt/Makefile.in: Added.
	* mipsidt/configure: Added.
	* mipsidt/configure.in: Added.
	* mipsidt/crt0.S: Added.

	* mipsidt/syscalls.c: Added.
	* mipsidt/test.c: Added.

	* configure (mips*vr4300*-*-*): Use new mipsidt target directory.

Mon Oct  9 21:07:08 1995  Michael Meissner  <meissner@cygnus.com>

	* rs6000/Makefile (all asm rules): Remove asm.h dependency.
	* rs6000/asm.h: File deleted, moved to gcc directory as ppc-asm.h.
	* rs6000/mvme-{crt0,exit,inbyte,outbyte}.S: Include ppc-asm.h, not
	asm.h.
	* rs6000/sim{-crt0,ulator}.S: Ditto.

	* rs6000/{mvme,sim}-crt0.S (_start): Don't use FUNC_START/FUNC_END
	for _start, since the linker needs to see this.

Mon Oct  9 12:08:12 1995  Stu Grossman  (grossman@cygnus.com)

	* sparc/sparc-stub.c:  include sparclite.h to get access to register
	fondling macros.
	* (trap_low):  Save and restore FP regs if necessary.  Also, clean
	up save and restore of debug unit regs.
	* (hard_trap_info):  Add more architecturally defined traps.
	* (set_debug_traps):  Only set FP disabled trap if FP is disabled.
	* (get_in_break_mode):  Clean up.  Get rid of calls to
	set_hw_breakpoint_trap().  Also, use write_asi macro
	* (handle_exception):  Clean up `g' and `G' commands.  Add `P'
	command.
	* (hw_breakpoint):  Why was this here!?  It's gone now...
	* sparc/crt0.s:  Speed up prom copy loop.  Clean up window over/under
	flow setup.  Call main instead of jumping to it.
	* sparc/salib.c (get_uart_status rcv_char flush_i_cache):  Use new
	and improved read_asi macro.
	* (win_ovf win_unf):  Parameterize window size.
	* sparclite.h (read_asi):  Rewrite so that macro returns an rval.
	* (read_psr write_psr):  New macros to do the obvious.
	* Add conditionalized code for 933 window size.

Fri Oct  6 15:35:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/simulator.S (abort): Delete abort.
	* rs6000/sim-abort.c: New file, to print message that abort was
	called.
	* rs6000/Makefile.in (SIM_OBJS): Add sim-abort.o.

	* rs6000/asm.h (FUNC_NAME, FUNC_START, FUNC_END): New macros that
	give the start and end of a function written in assembler.  If
	-mcall-aixdesc or -mcall-nt, create a function descriptor and name
	the real function with one or two leading periods.

	* rs6000/{simulator,sim-crt0}.S: Use new function macros.
	* rs6000/mvme-{crt0,exit,inbyte,outbyte}.S: Ditto.
	
	* rs6000/Makefile.in: Add asm.h as a dependent for all .S files.
	Compile the .S files with gcc, so that -mcall-* flags define the
	appropriate macros.

Thu Sep 28 13:49:45 1995  Ian Lance Taylor  <ian@cygnus.com>

	* sparc/ex93x.ld: Remove crt0.o from INPUT; gcc will normally pass
	crt0.o anyhow.  Add leading underscore to __CTOR_LIST__, et. al.
	* sparc/salib.c (__main): Comment out empty function.

Wed Sep 20 14:36:12 1995  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (maintainer-clean): New synonym for realclean.
	* hp74x/Makefile.in (maintainer-clean): Likewise.
	* m68k/Makefile.in (maintainer-clean): Likewise.
	* pa/Makefile.in (maintainer-clean): Likewise.
	* mips/Makefile.in (maintainer-clean): Likewise.
	* rs6000/Makefile.in (maintainer-clean): Likewise.
	* sparc/Makefile.in (maintainer-clean): Likewise.
	* doc/Makefile.in (maintainer-clean): Likewise.
	* testsuite/Makefile.in (maintainer-clean): Likewise.
	* testsuite/libgloss.all/Makefile.in (maintainer-clean): Likewise.

Sat Sep 16 23:04:11 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/Makefile.in (all): Fix typo preventing simulator from
	being built.

Tue Sep 12 10:43:41 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* rs6000/Makefile.in: Misc mvme support fixes.

	* rs6000/{mvme-exit.S, mvme-inbyte.S, mvme-outbyte.S}: Strip
	leading underscores from identifiers.

	* m68k/asm.h: New file, macro definitions helpful for assembly
	language programming.
	* m68k/{cpu32bug.S, crt0.S, mvme.S, mvme135-asm.S, mvme162lx-asm.S}:
 	Use asm.h.

	* rs6000/{mvme-crt0.S, mvme-exit.S, mvme-inbyte.S, mvme-outbyte.S}:
	New files, preliminary support for motorola mvme targets running 
	the ppcbug monitor.
	* rs6000/Makefile.in: Build mvme support.

	* rs6000/asm.h: New file, macro definitions helpful for assembly
        language programming.
	* rs6000/{sim-crt0.S, simulator.S}: Use asm.h.

Fri Sep  8 18:51:29 1995  Michael Meissner  <meissner@wogglebug.tiac.net>

	* rs6000/sim-sbrk.c (sbrk): Add cast to silence warning.

Fri Sep  8 13:03:12 1995  Brendan Kehoe  <brendan@lisa.cygnus.com>

	* m68k/idp-inbyte.c (READREG): Add volatile to the cast, to avoid
	reordered insns that can end up being an infinite loop.
	* m68k/idp-outbyte.c (READREG): Likewise.

Wed Sep  6 10:01:33 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/sim-sbrk.c (sbrk): Use the brk system call, instead of
	using a large static area for the break area.

Thu Aug 24 14:57:28 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/Makefile.in (install*): Add separate installation rules
	for sim and evm targets.

Wed Aug 23 16:49:02 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* rs6000/sim*: Add PowerPC simulator support.

Tue Aug 22 11:52:40 1995  Jeff Law  (law@snake.cs.utah.edu)

	* pa/hp-milli.s: Add entry/exit pseudo-ops around all exported
	code.  Fix callinfo directives to include "millicode" attribute.

	* pa/hp-milli.s (divU): Fix bug found by arith-rand1.c testing.

Mon Aug 21 23:31:42 1995  Jeff Law  (law@snake.cs.utah.edu)

	* pa/crt0.S ($START$): Use local label prefix for local label
	"bssloop".

Mon Aug 14 11:57:46 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* ex93x/sparclite.h: add __WINSIZE.
	* ex93x/salib.c: Use __WINSIZE, implements write with $O command of
	stub protocol.

Thu Aug  3 14:40:12 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* Makefile.in: Updated to reflect filename changes.

	* m68k/mc68681-duart.h: Renamed to m68681reg.h.
	* m68k/mc68681-duart.c: Split up and renamed to idp-inbyte.c and
	idp-outbyte.c

Fri Jul 28 11:23:24 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k/mc68681-duart.h: Removed everything except register offsets.
	Changed offsets so they reflect actual chip instead of how device
	is mapped into the IDP address space.
	* m68k/mc68681-duart.c (DUART_ADDR): New macro, base address.
	(READREG, WRITEREG): Changed to correspond to unusual way the
	device is mapped (ie. base address + (reg offset * 4) + 3)).
	(duart_status, duart_mode, duart_init, duart_restore): Removed,
	these interfaces were never used and didn't work.
	(outbyte): Removed unconditional delay.

	* m68k/crt0.S: Use SYM(_end) instead of end.  This completes my
	change of April 18th which makes the "_end" symbol compatible 
	with both a.out and coff toolchains.
	(zerobss): Handle zero-length bss.

Thu Jul 27 15:35:37 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* configure, {doc, hp74x, m68k, mips, pa, sparc}/configure:
	regenerated with autoconf 2.4.2.

Wed Jul 26 13:42:27 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* doc/porting.texi: Fix typos and spelling errors.

Mon Jun 26 09:23:23 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

	* pa/Makefile.in: Enable HP supplied millicode routines.
	* pa/hp-milli.s:  Make sure copyright notice gets included
	in objects files.

	* pa/crt0.S ($START$): Use "%" instead of "'" to avoid losing whe
	run through cpp.

Fri Jun 16 18:40:22 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

	* pa/crt0.S ($START$): Use long-calls to call main and exit.

Tue Jun 13 16:05:13 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* pa/crt0.S: Call exit() after returning from main.

Tue Jun 13 10:43:14 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* Makefile.in, {doc, hp74x, m68k, mips, pa, sparc}/Makefile.in
	  (distclean, realclean): Remove autoconf-generated config.cache
	  and config.log files.

Mon Jun  5 15:56:22 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* config/{default.mh, dos.mh} (CFLAGS_FOR_TARGET): Added -O2.
	  (.c.o, .s.o, .S.o, etc.): Don't use @ to hide how the compiler
	  is invoked, it makes it much more difficult to debug.

Tue May 30 19:07:59 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* testsuite/libgloss.all/math.c: Add additional tests for modulo.

Mon May 29 13:03:39 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* stat.c: Add const so it works with newlib's stat.h.

Thu May 25 16:28:42 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* m68k/mvme.S: Extend sign using two instructions rather than one
	so it'll work on a stock mc68000.

Tue May 23 18:12:19 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* close.c, stat.c, fstat.c, open.c, lseek.c, print.c, putnum.c,
	unlink.c read.c, sbrk.c, getpid.x, kill.c: New files that used to
	be glue.c.
	* {m68k,pa,mips}/Makefile.in: Build using broken up glue.c.
	* pa/Makefile.in: Make all just build BSP, add seperate test
	target.
	* most files: add Cygnus BSD-style copyright message.

Tue May 23 12:58:03 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* configure.in, {hp74x, m68k, mips, pa, sparc}/configure.in:
	  Use changequote() to temporarily turn off m4 quoting so that
	  i[345]86-*-go32 pattern in case statement remains unchanged.
	* configure, {hp74x, m68k, mips, pa, sparc}/configure:
	  regenerated.

Tue May 23 11:15:52 1995  Angela Marie Thomas  <angela@cirdan.cygnus.com>

	* mips/Makefile.in (SCRIPT): added "SCRIPT = array.ld" so installs
	work correctly.

Mon May 22 21:33:49 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* ex93x: renamed to sparc.
	* r3000: renamed to mips.
	* hppro: renamed to pa.
	* configure.in, configure: Use new directory names.
	* config/default.mh: Remove '' in sed program_transform_name so
	it actually works.
	* doc/porting.texi: update doc.

Wed May 17 17:25:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* doc/configure.in: converted to autoconf.
	* doc/configure: New file, generated with autoconf 2.3.

	* Makefile.in, config/{ex93x, hp74x, hppro, m68k,
	  r3000}/Makefile.in (Makefile.in): Added config.status to
	  dependency list.
	  (config.status): New target.

	* m68k/Makefile.in: Build M68332BCC BSP.

Wed May 10 18:43:21 1995  Stu Grossman  (grossman@andros.cygnus.com)

	* glue.c:  Change decl of end to char[] for some reason.
	* (sbrk):  Rewrite sbrk so that it works.
	* (fstat):  Return status indicating fd is for a tty.  Makes stdio
	work better.
	* hppro/crt0.S (_sr4export):  Retrieve rp from -24(sp), not
	-18(sp).  Note that -24 decimal == -18 hex...
	* hppro/op50n-io.S:  Add read and write interfaces to the rom
	monitor.  Unfortunately, the monitor doesn't seem to work...
	* hppro/op50n.ld:  Clean up lots of stuff.  Define memory in a
	nice way.  Define stack and reserve space.  Put heap after stack.

Thu May  4 10:28:01 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* configure.in (AC_PREREQ): Changed to 2.3, since autoconf
	  versions prior to this generate code that AIX 4.X's sh can't
	  hack.

	* m68k/Makefile.in (BCC_BSP, BCC_OBJS): New BSP for M68332BCC.
	* m68k/cpu32bug.S: New file, support for cpu32bug monitor used by
	  bcc.
	* m68k/bcc.ld: Link with bcc.o

Fri Apr 21 16:17:17 1995  Torbjorn Granlund  <tege@rtl.cygnus.com>

	* hppro/{milli.S,divide.S,divI.S,divU.S,multiply.S,test-div.c,
	test-dyncall.c,test-mul.c,remI.S,remU.S,dyncall.S}: Delete.
	* hppro/divcnst-generic/*: Delete.
	* hppro/divcnst-fast/*: Delete.
	* hppro/Makefile.in: Delete junk.

Tue Apr 18 11:22:47 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k/{bcc.ld idp.ld, mvme135.ld, mvme162lx.ld}: Removed stack
	  section, moved __stack definition to the top level and set it
	  explicitly to the value appropriate to the target board.
	  Added __end symbol (needed for a.out toolchains).

Mon Apr 17 12:48:48 1995  Stu Grossman  (grossman@andros.cygnus.com)

	* hppro/w89k.ld:  Move _stack to before `end' and `_end' so that
	malloc doesn't trash the stack.
	* hppro/w89k-io.c (outbyte):  Make this be void, and remove return
	value, which is useless anyway.

Mon Apr 17 06:13:55 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k/bcc.ld: New file, linker script for M68332BCC Business Card
	  Computer.
	* m68k/Makefile.in: Install BCC linker script.

	* Makefile.in: Fixed typo.

	* hppro/configure.in: Changed AC_INIT file from crt0.s to crt0.S.
	* hppro/configure: regenerated.

Mon Apr 17 00:02:15 1995  Stu Grossman  (grossman@andros.cygnus.com)

	* hppro/op50n.ld:  Define _stack explicitly instead of implicitly
	via common.
	* hppro/{w89k-io.c w89k.h}:  Use pointers to volatile for inp and
	outp.  Use correct port numbers for COM1 serial port.

Fri Apr 14 16:56:35 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* m68k/mc68ec.c (_exit): Use extended asm construct to get the
	proper immediate-operand syntax for whatever the target assembler
	configuration is.
	* m68k/mvme.S (__IMMEDIATE_PREFIX__, IMM): Copy and use macro
	definitions as in m68k/crt0.S.

Thu Apr 13 16:48:46 1995  Angela Marie Thomas  <angela@cirdan.cygnus.com>

	* Makefile.in: fixed clean rules such that they do not try to
	  clean ${SUBDIRS} if libgloss not supported on that target.

Thu Apr 13 13:39:46 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* configure.in: Append new subdirectories to ${configdirs}.
	  (go32-*-*): Removed.
	* configure: Regenerated.

	* m68k/mvme162lx.ld: Put __stack in ram, even though it's not
	  loaded.

	* m68k/Makefile.in: Don't hide how BSP objects are built.

	* glue.c (print, putnum): declared void.

	* {hppro,m68k}/Makefile.in: Use ${CC_FOR_TARGET} to link executables.
	  (LIBS_FOR_TARGET): Removed.

	* config/{default.mh, dos.mh} (NEWLIB_CFLAGS, NEWLIB_LDFLAGS): New
	  make variables, expands to compiler flags to find headers and
	  libraries if ${objroot}/newlib is present.
	  (CFLAGS_FOR_TARGET): Added ${NEWLIB_CFLAGS}.
	  (LDFLAGS_FOR_TARGET): Added ${NEWLIB_LDFLAGS}.
	  (LIBC_FOR_TARGET, LIBM_FOR_TARGET, LIBGCC_FOR_TARGET,
	  LIBS_FOR_TARGET): Removed.

Thu Apr 13 11:51:17 1995  Torbjorn Granlund  <tege@adder.cygnus.com>

	* m68k/Makefile.in (install): Use correct names for MVME* variables.
	* configure.in: Delete `unknown' from m68* case.

Thu Apr 13 11:47:01 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k/crt0.S: initialize stack pointer to __stack before creating
	  inital stack frame.

	* m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Move __stack out of
	  bss, and into its own segment with an address at top of RAM.

Wed Apr 12 12:36:28 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* {.,ex93x,hp74x,hppro,m68k,r3000}/{Makefile,configure}.in:
	  converted to autoconf.
	* {.,ex93x,hp74x,hppro,m68k,r3000}/configure: New files, generated
	  from configure.in with autoconf 2.3.

Mon Apr 10 22:50:48 1995  J.T. Conklin  (jtc@rtl.cygnus.com)

	* m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Revert last change,
	  CONSTRUCTING and RELOCATING only work for linker scripts built
	  from ld/scripttmpl/*.

	* m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Changed to use
	  CONSTRUCTING and RELOCATING expressions so that the ctor/dtor
	  tables and etext, edata, and end variables are only done when
	  appropriate.

Fri Apr  7 17:30:35 1995  Stu Grossman  (grossman@andros.cygnus.com)

	* config/default.mh:  Use $${srcroot} instead of ${SRCROOT} to get
	inherited value.
	* hppro/crt0.S:  Remove static definitions of _stack and $global$.
	Let the linker script define them in the BSS segment.
	* hppro/w89k.ld:  Use MEMORY to define memory regions.  Add defs
	for $global$ and _stack in the appropriate segments.

Tue Apr  4 18:27:37 1995  Jason Molenda  (phydeaux@cygnus.com)

	* Makefile.in (FLAGS_TO_PASS): pass down MAKEINFO.

Thu Mar 30 18:10:53 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* ex93x/ex93x.ld: Add crt0.o in INPUT.
	* ex93x/sparcl-stub.c: Add nop after bg insn.
	* ex93x/sparc-stub.c: Add & 0x7f mask to all character input.

Thu Mar 30 15:22:31 1995  Rob Savoye  <rob@rtl.cygnus.com>

	* {hppro,m68k,ex93x,testsuite/libgloss}/configure.in: Add SRCROOT
	variable.
	* {hppro,m68k,ex93x,testsuite/libgloss}/Makefile.in: Add SRCROOT
	variable.
	* config/default.mh: Use SRCROOT to find the newlib includes.

Tue Mar 28 19:54:26 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* configure.in, testsuite/configure.in: Add SRCROOT variable.
	* glue.c: Change "char *path" to "const char *path" so it works
	with the changes stat.h.

Fri Mar 24 17:29:08 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* ex93x/ex93x.ld: The stubs module now can have different names for
	different SPARClite chips. Use default one which is slite930.o.

Mon Mar 20 15:49:46 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k/mc68ec.c (_exit): Changed to take integer status argument.

Fri Mar 17 17:48:42 1995  Kung Hsu  <kung@mexican.cygnus.com>

        * config/default.h: add -I. to INCLUDES.
	* ex93x/salib.c: to include sparclite.h.
	* ex93x/sparclite.h: new file copied from gdb/sparclite.

	* config/default.mh: Fix INCLUDES to one level less '../'.

Mon Mar 13 17:05:35 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* testsuite/libgloss.all/misc.c: Misc bug reports, mostly
	soft-float tests.

Wed Mar  8 19:00:18 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* m68k/{crt0.S, mvem135.ld, mvme162lx.ld, idp.ld}: Setup the stack
	in the linker script. Use a macro to cover using '#' or '&' for
	immediate values.
	* m68k/{mvme135-asm.S, mvme162lx-asm.S}: Use a macro to cover
	using '#' or '&' for immediate values.
	* testsuite/libgloss.all/io.c: Add a test for read().

Thu Feb 16 21:13:34 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* glue.c: Make use _ansi.h, move to top level libgloss directory
	form all other directories.
	* Makefile.in: All Makefiles had SCRIPTS and OBJROOT added.
	* {m68k,hppro,r3000)/Makefile.in: All build the test the same way
	using OBJROOT.
	* configure.in: All configure.in now edit the value to OBJROOT in
	the Makefiles they produce.
	* config/default.mh: Use OBJROOT for paths to test for fresh
	binaries.
	* configure.in: Add the testsuite directory.
	* testsuite/config/{m68k.mt,mips.mt}: New target support for
	MVME135, IDP, and Array targets.

Thu Feb  9 21:45:33 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* testsuite/libgloss.all{varargs.c,varargs2.c}: Test cases for 
	traditional and ANSI varargs. (which currently fail)
	* Makefile.in: Build intelligently and use dependancies so we
	don't rebuild the world for each test run.
	* configure.in: Make a .gdbinit file to run the tests and load via
	gdb.

Wed Mar  8 22:35:29 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* m68k/idp.ld: Omit STARTUP line, since crt0.o is being supplied
	by gcc.

Thu Feb 23 12:08:19 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* m68k/crt0.S: Use '&' instead of '#' for immediate operands.
	* m68k/mc68ec.c: Ditto, in asm statements.
	* m68k/mvme.S: Ditto.

Wed Feb  1 23:55:39 1995  Angela Marie Thomas  <angela@cirdan.cygnus.com>

	* Makefile.in (all): added "else" statements for Ultrix to work

Fri Jan 27 10:48:20 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* testuite/{config,lib,libgloss.all}: DejaGnu testing support.
	* testsuite/config/support.c: A minimal testing API for minimal
	targets.
	* testsuite/config/hppa.mt: Set build flags for PRO targets.
	* libgloss.all/{float.c,memory.c,io.c,double.c,math.c,array.c}:
	Test cases for libgloss and soft-float.

	* hppro/{w89k.ld,op50n.ld}: Set .text here now.

Wed Jan 25 21:16:38 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* testsuite/{config,lib,libgloss.all}: The beginnings of a test
	suite for low level stuff. A few test cases now all build.

Thu Jan 12 13:02:12 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* config/default.mh: Change default path for linking in a freshly
	built libc.a, libm.a, libgcc.a to work with -msift-float.

	* hppro/Makefile.in: Set MULTILIB so the -msoft-float safe
	libraries get used.

	* m68k/Makefile.in: Use explicit rules, rather than redefining
	.c.o. This is to force compiling with -m68000.

Mon Jan  9 15:28:10 1995  Rob Savoye  <rob@darkstar.cygnus.com>

	* {hppro,m68k,r3000}/glue.c: Return correct value on receiving a
	'\n' or '\r'.

Fri Dec 30 15:05:03 1994  Rob Savoye  <rob@darkstar.cygnus.com>

	* doc, doc/Makefile.in, configure.in: New directory.
	* doc/porting.texi: New manual that explains porting the GNU tools
	to embedded systems.

Mon Dec 19 16:05:37 1994  Kung Hsu  <kung@mexican.cygnus.com>

	* ex93x/Makefile.in: Use sparcl-stub.c instaed of sparc-stub.c,
	which has hardware breakpoint support.
	* ex93x/Makefile.in: Also generate slite930.o and slite931.o, instead
	slite.o.
	* ex93x/sparcl-stub.c: New file.
	* ex93x/sparc-stub.c: Use latest from gdb/sparclite directory.

Fri Dec 16 15:17:14 1994  Rob Savoye  <rob@darkstar.cygnus.com>

	* r3000/crt0.S: Zero the bss section by words.

	* r3000/Makefile.in: Add in the rest of the support code for the
	Array Tech board.

	* r3000/array.ld: Set the memory map for the Array Tech LSI
	prototype.

	* r3000/array-io.c: Lowest level I/O code for Array Tech LSI
	prototype using ROM entry points.

Wed Dec 14 10:23:41 1994  Rob Savoye  <rob@darkstar.cygnus.com>

	* hppro/crt0.S: Add _sr4export function so GDB calls work.

	* hppro/Makefile.in: Link in libc.a twice so atexit works().

	* hppro/glue.c: Don't stub out __main anymore.

Tue Dec 13 15:42:23 1994  Rob Savoye  <rob@darkstar.cygnus.com>

	* r3000/Makefile.in: Look for both libgcc2 and libgcc.

	* r3000/glue.c,crt0.S,test.c: New support for for mips.

	* configure.in: Configure r3000 dir for a mips chip.

Tue Dec  6 15:24:41 1994  Rob Savoye  <rob@darkstar.cygnus.com>

	* hppro/divcnst-generic/*.S. Add .exit and .procend so it'll
	compile.

	* hppro/Makefile.in: Link in the rest of the millicode routines.

Mon Nov 21 20:21:48 1994  Rob Savoye  <rob@darkstar.cygnus.com>

	* hppro/configure.in,config/dos.mh: Work for a canadian cross,
	 since xgcc is for the wrong architecture.
	 
Thu Nov 17 21:07:52 1994  Rob Savoye  <rob@darkstar.cygnus.com>

	* config/default.mh: Find the corrrect libgcc2.a.

	* Makefile.in: Link in libgcc2.a by default. Build new millicode
	routines.

	* divI.S, divU.S, multiply.S, remI.S, remU.S, test-div.c,
	test-dyncall.c, test-mul.c: New millicode files for low level math
	support.

	* test.c: Use printf so millicode gets exercised.

	* divcnst-fast/divU_10.S, divU_12.S, divU_3.S, divU_5.S, divU_6.S,
	divU_9.S: Fast versions of some division routines.

	* divcnst-generic/divI_14.S, divI_5.S, divI_9.S, divU_14.S
	divU_5.S, divU_9.S divI_10.S, divI_15.S, divI_6.S, divU_10.S,
	divU_15.S, divU_6.S divI_12.S, divI_3.S, divI_7.S, divU_12.S,
	divU_3.S, divU_7.S: Yet more millicode routines.

Wed Nov 16 15:25:03 1994  Rob Savoye  (rob@cygnus.com)

	* config/default.mh: Add default searches for the correct libc and
	libm.
	
	* Makefile.in: Use ${LIBC_FOR_TARGET} and ${LIBM_FOR_TARGET}

	* hppro/w89k.ld,op50n.ld,Makefile.in: Don't try to link in libc
	for the test program.

Tue Nov  8 17:12:35 1994  Rob Savoye  <rob@rtl.cygnus.com>

	* m68k/glue.c: Remove errno so there's no libc dependancies.

	* m68k/mvme135-asm.S: Moved setup_vectors and exceptionHandler
	from mvme.S so the library can link without the stub.

	* m68k: New directory. Merge the idp, shared, and mvme135
	directories into one place.

	* config/default.mh: Use CC_FOR_TARGET for .S files so the
	preprocessor actually gets run.

	* ex93x/crt0.s, ex93x/salib.c: Migrate changes from gdb/sparclite.

Fri Sep 16 21:22:57 1994  Rob Savoye  (rob@darkstar.cygnus.com)

	* shared, idp, mvme135: Support for Motorola IDP and MVME135 m68k
	based target boards. Moved from newlib/stub.

	* ex93x: Move from newlib/stub/ex93x. Sparclite ex93x
	board support.

	* hp74x, hppro: Add HP 742 & hp743 code "as is" with a working but
	unfinished gdb stub. Add hppro for the WinBind and Oki Pa target
	boards.

	* libgloss: Creation. A library for board support packages. The
	Gnu low-level OS Support. Move mvme135/ChangeLog to here.

Wed Sep 29 20:42:34 1993  Rob Savoye  (rob@darkstar.cygnus.com)

        * mvme135/crt0.S, mvme135/glue.c: Moved to ../shared. 

Thu Apr  1 13:18:15 1993  Ian Lance Taylor  (ian@cygnus.com)

        * mvme135/mvme.S: Renamed exceptionhandler to exceptionHandler, which is
        what mvme135-stub.c expects.

Tue Mar 30 18:44:43 1993  Doug Evans  (dje@poseidon.cygnus.com)

        * mvme135/mvme135-stub.c (initializeRemcomErrorFrame): Remove reference to
        __STDC__.

Tue Dec 29 10:15:33 1992  Ian Lance Taylor  (ian@cygnus.com)

        * mvme135/mvme135-asm.S: new file.
        mvme135-stub.c: moved all assembler routines into mvme135-asm.S.
        Makefile.in: build mvme135-stub.o.

        * ChangeLog: created.
