Description: Fix spelling errors
Author: Ana Guerrero Lopez <ana@ekaia.org>, Mehdi Dogguy <mehdi@debian.org>
Last-Update: 2016-09-04

--- a/doc/rst/iblinkinfo.8.in.rst
+++ b/doc/rst/iblinkinfo.8.in.rst
@@ -57,7 +57,7 @@
 
 **--switch, -S <port_guid>** same as "-G". (provided only for backward compatibility)
 
-How much of the scan to be printed can be controled with the following.
+How much of the scan to be printed can be controlled with the following.
 
 **--all, -a**
 Print all nodes found in a partial fabric scan.  Normally a
@@ -81,7 +81,7 @@
 indicated as down in the specified cache, and is still down, do not output it in the
 resulting output.  This option may be particularly useful for environments
 where switches are not fully populated, thus much of the default iblinkinfo
-info is considered unuseful.  See **ibnetdiscover** for information on caching
+info is considered useless.  See **ibnetdiscover** for information on caching
 ibnetdiscover output.
 
 
--- a/doc/rst/ibqueryerrors.8.in.rst
+++ b/doc/rst/ibqueryerrors.8.in.rst
@@ -63,7 +63,7 @@
 
 **CAUTION** clearing data or error counters will occur regardless of if they
 are printed or not.  See **--counters** and **--data** for details on
-controling which counters are printed.
+controlling which counters are printed.
 
 **--details** include receive error and transmit discard details
 
--- a/doc/rst/infiniband-diags.8.in.rst
+++ b/doc/rst/infiniband-diags.8.in.rst
@@ -120,8 +120,8 @@
 
 	See: ibtracert, ibroute, dump_lfts, dump_mfts, check_lft_balance, ibfindnodesusing
 
-Peformance counters
--------------------
+Performance counters
+--------------------
 
 	See: ibqueryerrors, perfquery
 
--- a/doc/rst/rdma-ndd.8.in.rst
+++ b/doc/rst/rdma-ndd.8.in.rst
@@ -27,7 +27,7 @@
 DETAILS
 =======
 
-Full operation of this deamon requires kernels which support polling of the
+Full operation of this daemon requires kernels which support polling of the
 procfs hostname file as well as libudev.
 
 If your system does not support either of these features, the daemon will set
@@ -37,7 +37,7 @@
 Node Description format
 -----------------------
 
-The deamon uses the nd_format configuration option within the ibdiags.conf
+The daemon uses the nd_format configuration option within the ibdiags.conf
 file.  %h and %d can be used as wildcards in that string to specify the dynamic
 use of <hostname> and <device> respectively.
 
